Rigging Canada Header Logo

6 te Lever Chain Puller

  • Also known as 'come-a-long chain hoist'
  • 622 Lever Chain Puller
  • Perfect for construction or industrial applications
  • Typically used to position, pull, or lift objects
  • Meets or exceeds ASME B30.21
  • Individually proof tested (1.5X WLL)
  • Certificate of test provided with each hoist
  • TUV Rheinland GS marked & approved
  • Pullers equipped with overload protection & automatic brake engagement
  • The principle of overload protection brake engagement is the same on both lever pullers & chain blocks
  • The unit has an adjustable friction disk, adjusted at the factory, that when engaged produces a friction force between the disk and lever
  • Each unit is tested twice; The first is a standard proof-load test, the second is used to set the friction disk brake engagement
  • Example: A 1.5 Ton block is first proof-loaded to 1.5x the WLL (1.5 x 1.5 = 2.25 ton), then is tested again to 1.3x the WLL (1.5 x 1.3 = 1.95 ton)
  • If the hoist is taken above this load the friction disk will engage, and the hoist will not lift
  • WARNING : Never exceed published working load limit (WLL)
  • WARNING : Read and understand all warnings, maintenance, and operation instructions included with each unit prior to use
Lever Chain Puller Hoist Dimensions
Part ID 6-6TLP
Description 6 te Lever Chain Puller
Brand Oceanside
Capacity(tonnes) 6
A(mm) 200
B(mm) 115
C(mm) 235
D(mm) 64
H(mm) 620
L(mm) 410
K(mm) 52
Standard Lift(feet) 5
Load Chain Strands 2


High volume discounts may be available for this item. Contact us for large quantities.

Related Products

KITO ER2 Single Speed Three Phase Electric Chain Hoist
KITO ER2 Single Speed Three Phase Electric Chain Hoist

Starting at: $3093.00

Beam Clamps
Beam Clamps

Starting at: $99.78

KITO M3CB Steel Body Chain Fall
KITO M3CB Steel Body Chain Fall

Starting at: $880.00

Permanent Magnet Lifters
Permanent Magnet Lifters

Starting at: $364.25