Rigging Canada Header Logo

9 te Lever Chain Puller

  • Also known as 'come-a-long chain hoist'
  • 622 Lever Chain Puller
  • Perfect for construction or industrial applications
  • Typically used to position, pull, or lift objects
  • Meets or exceeds ASME B30.21
  • Individually proof tested (1.5X WLL)
  • Certificate of test provided with each hoist
  • TUV Rheinland GS marked & approved
  • Pullers equipped with overload protection & automatic brake engagement
  • The principle of overload protection brake engagement is the same on both lever pullers & chain blocks
  • The unit has an adjustable friction disk, adjusted at the factory, that when engaged produces a friction force between the disk and lever
  • Each unit is tested twice; The first is a standard proof-load test, the second is used to set the friction disk brake engagement
  • Example: A 1.5 Ton block is first proof-loaded to 1.5x the WLL (1.5 x 1.5 = 2.25 ton), then is tested again to 1.3x the WLL (1.5 x 1.3 = 1.95 ton)
  • If the hoist is taken above this load the friction disk will engage, and the hoist will not lift
  • WARNING : Never exceed published working load limit (WLL)
  • WARNING : Read and understand all warnings, maintenance, and operation instructions included with each unit prior to use
Lever Chain Puller Hoist Dimensions
Part ID 6-9TLP
Description 9 te Lever Chain Puller
Brand Oceanside
Capacity(tonnes) 9
A(mm) 200
B(mm) 115
C(mm) 320
D(mm) 85
H(mm) 700
L(mm) 410
K(mm) 58
Standard Lift(feet) 5
Load Chain Strands 3
This item may require a forklift to unload
$1.00 Shipping On This Item


High volume discounts may be available for this item. Contact us for large quantities.

Related Products

Beam Clamps
Beam Clamps

Starting at: $99.78

Permanent Magnet Lifters
Permanent Magnet Lifters

Starting at: $364.25

KITO CF Aluminum Body Chain Fall
KITO CF Aluminum Body Chain Fall

Starting at: $394.00

KITO UBC Beam Clamps
KITO UBC Beam Clamps

Starting at: $188.00